- Flyline Music AG

Direkt zum Seiteninhalt


Produkte > Studio Equipment > Purple Audio > 500 Series > Modules
5E3 - LilPEQr
2 Band Program Equalizer Module

- 500 Series 2 Band Program EQ Modul
- Mastering Version mit gesteppten Poti erhältlich
- Volume Control Regler
- 3 Frequenzen für Höhen- und Tiefenband
- Boost only, keine Absenkung möglich
- Frequenzgang von 10 Hz bis 120 kHz
- Trafosymmetrierter Input und Output
- Echter Bypass mit Relais

When the EQ is first switched in (center switch position – “IN” – LED off) your signal is injected passively into the tone network, directly following the input transformer. As with many classic program equalizers, this configuration allows for the ultimate in wide, lush, mix-buss response with extra “glue” and all that richness.

Flip the switch one more click (upper switch position – “IN+Level” – LED red) to activate the buffered “Level” control. Placed in between the input transformer and EQ network, these discrete, class A buffers change the response ever so slightly, making the signal seem a bit tighter and more focused. This mode is more useful on individual sources within a mix.

Relay true bypass (lower switch position – “BYP” – LED green) allows for easy before and after EQ comparisons, and a simple overall circuit path allows for wide bandwidth so that everything passes through… sounding better! In program mode (“IN”), with both EQ knobs centered, frequency response is +/- 0.5dBu from 20Hz to 20kHz, and extends below 10Hz and well beyond 120kHz before any drooping occurs.

*The LILPEQr-M also includes stepped potentiometers for stereo matching and easy recall specifically in mastering situations.
Copyright 2017. All rights reserved.
Zurück zum Seiteninhalt | Zurück zum Hauptmenü