240V/110V mains voltage input selector
Class A (DSOP2) Transformer Output specs.
Frequency response: 20Hz to 20kHz +- 0.5dB,
Maximum Output = +26dBu @ 1kHz,
Noise = -90dB @ 20Hz to 20kHz.
Output connections: XLR’s and TRS 1/4″
Class A, transformerless, True balanced Mic input stage.
Microphone inputs: XLR’s on Front and Rear Panels
Individual Earth Lift: Push-button Switches
Gain Range (Mic input): -30 to -70 in 5dB steps
With 10dB more available on the fader.
Gain reduction: -15dB push-button pad switch (Mic only)
High Input Impedance DI: Mono 1/4″ Jack on front panel
Gain Meter: LED Metering.
Phantom Power: Switchable phantom
High Pass Filter: on Push-button Switch
Vari-filter control 70hz to 400hz on a 21 postion detented
Phase Reverse: on Push-button Switch
Frequency Response Mic Input: -0.4dB @ 40Hz, -0.3dB @ 25kHz
Frequency Response DI Input: -0.3dB @ 40Hz, – 0.5dB @ 25kHz
Typical Headroom: +26dB on Mic-Pre stage
DI Stage gain: Maximum of 30dB
Gyratory-based EQ Frequency Centres: (4 Bands)
High – 25K 15K, 10K,
Hi Mid – 6K, 3K, 1K6,
Low Mid – 800Hz, 400Hz, 200Hz,
Low – 130Hz, 80Hz, 40Hz
EQ Cut/Boost Levels: 16dB Cut/Boost
fully detented pots in 21 positions
PTFE silver military grade cable