- Flyline Music AG

Direkt zum Seiteninhalt

Hauptmenü:

Produkte > Studio Equipment > API > 19" Outboard
3124MV
4 Channel Microphone Preamplifier
with Output Volume Control & Mixer

- 4 Kanal Mikrofon Vorverstärker, API 312 Schaltung
- Output Level Control mittels Potentiometer
- Stereo-Mixer mit Level auf TRS Outputs
- Insertpunkte zwischen Kanälen und Stereomix
- Aux Send pro Kanal und Stereo Aux Return für Mix
- Gain, Level, Panorama, Aux pro Kanal
- API 2520 OpAmp in Schaltungsdesign
- 3:1 Output Transformator Tap Schaltung
- 4 XLR female Inputs
- 4 Frontpanel Hi-Z Instrumenten Inputs
- 4 XLR & 4 TRS Outputs
- Phase, Pad -20dB, Phantom Power

Both the 3124V and the 3124MV are designed with the professional engineer in mind. Both units give four channels of the highest possible quality mic preamp. However, the 3124MV provides an additional audio mixer with a transformer balanced output, keeping the unit size and price reasonable. Both models are equally at home in the control room, studio, and recording truck or on stage.

The 3124MV utilizes the same microphone preamp circuit that is used in all API consoles. It uses the RE-115 K mic input transformer along with the same output transformer that is used in API equalizers. The unit offers Variable Output Level Control, switchable 3:1 output transformer selection, and an internal 48-volt phantom power supply, which is front panel switchable for each channel. Also provided is a front panel -20 dB pad switch that affects both the mic and line in. A 1/4" phone jack is available on the rear panel for each channel as an insert tip-send/ring-return placed between the mic pre amp output and  the mixer input.

Like the 3124V, the 3124MV provides up to 65 dB of gain. The Hi-Z front panel input goes directly to the op-amp, allowing a low level input such as a guitar or bass to be amplified without a matching transformer or direct box. This Hi-Z input can accept input levels as high as +20 dBu, making it perfect for keyboards and other high level devices. The rear output is an XLR connector.

Additionally, the 3124MV adds a stereo panner with a level control, and a post "fader" aux send. The stereo panners and the aux sends are bussed to master output controls and then to the rear panel jacks. A stereo AUX return is provided to return effects or cascade additional mixers for more inputs. The unique stereo aux return control acts to balance the left/right signal, yet staying stereo. It can also be used as a mono return.
 
Suchen
Copyright 2017. All rights reserved.
Zurück zum Seiteninhalt | Zurück zum Hauptmenü