- Flyline Music AG

Direkt zum Seiteninhalt

Hauptmenü:

Produkte > Studio Equipment > Fredenstein > 500 Series > Racks
Bento 10S / 10DS
10 Slot Module Carrier

- 500 Series 10 Slot Rack, 19" 3U
- 2x XLR Input, 2x XLR Output - pro Kanal
- Interne Stromversorgung von 90 bis 240V, 50/60 Hz
- +/-16V DC 1.6A und +48V DC 0.15A, 533mA per Slot
- Channel Link-Schalter pro Kanalpaar
- Kompressor Link-Schalter pro Kanalpaar
- Bento 6DS mit Anzeige Parameter auf Display für
  F600A, F601A, F602, F603A/B und F607

The Fredenstein Bento 10S is a high performance module carrier for Fredenstein Series 600 modules or API-500 compatible plug-in cards. The unit can accept a maximum of 6 modules.

The Bento 10S features several important upgrades compared with third party products:
Universal power supply:   Mains voltages range from 90V AC to 240V AC, 50 to 60 Hz.

Increased output currents: +/-16V DC +/-3A and +48V DC 0.25A, 600mA per slot which is more than double the standard calls for.

The Bento 10S power supply is also designed for extremely low noise largely due to state of the art switching regulators that operate above 200 kHz, which is typically higher in frequency than most conventional switching regulators. They also follow “green” guidelines that minimize power consumption to only what is needed.

Other features include the capability to drive very large capacitive loads. Most other switching supplies might oscillate if presented with large capacitors to charge. The Bento 10S ramps up in a controlled manner (typically 0.2 seconds). Also unlike most +/- switching regulators, both the +16V and -16V are regulated independently and provide separate over current protection.
 
Suchen
Copyright 2017. All rights reserved.
Zurück zum Seiteninhalt | Zurück zum Hauptmenü