- Flyline Music AG

Direkt zum Seiteninhalt

Hauptmenü:

Produkte > Studio Equipment > Tube Tech > Modular Series > Modules
PM 1A
Tube Microphone Preamplifier Module

- Mono Röhren Mikrofon Vorverstärker Modul
- Röhrenbasierter Push-Pull Verstärker
- Gain von +10 bis +70dB in 2dB Steps
- Frontpanel DI Input mit bis +60dB Gain
- Pad Schaltung -20dB
- 3-stufige Input Impedanz
- Phase Reverse, Phantom Power
- Low Cut Filter 20/40 Hz
- Vergoldete Schalter
- Trafosymmetrierter Input und Output

The PM 1A is a combined mic preamp/DI, based on a classic TUBE-TECH design, but featuring even higher fidelity and a few new features: An impedance switch to match the input perfectly to all types of microphones, an overload indicator and 2 dB gain steps. Serious listening tests of the PM 1A have revealed a sound quality second to none, placing it among a handful of the worlds very best designs.

The PM 1A DI continues the TUBE-TECH tradition of extremely good sounding DI's, delivering world class sound for bass and guitar DI recordings. You simply won’t find a better DI than this!

Note: Due to the high quality of the TUBE-TECH RM Series power supply and the pristine audio circuits, the Modular Series products deliver exactly the same uncompromised sound quality as our 19” units.

The TUBE-TECH PM 1A is a combined Microphone Preamplifier and Direct Instrument amplifier. The input provides a switchable +48 V phantom power, a select-able mic. impedance of 600/1200/2400 Ohm, a phase reverse switch, a low-cut filter (20 Hz/40 Hz/off), as well as a switchable -20 dB pad. Gain is adjustable from +10 dB to +70 dB.

The Direct Instrument Input are unbalanced with a gain ranging from + 10 dB to + 60 dB. The amplifier is all tube. Input transformer is enclosed in a MU-metal can. Input and output transformers come with a static screen between the primary and secondary wirings. The input and output are balanced as well as fully floating.
 
Suchen
Copyright 2017. All rights reserved.
Zurück zum Seiteninhalt | Zurück zum Hauptmenü